Hand Held Applicators

	DYNAMIC Electronic Hand Held Label Applicator Used directly from it's own mains power supply or remotely from it's rechargeable batteries, the LD70 can dispense and apply labels up to 65mm wide and there is no restriction on the maximum length. (Some labels may require a registration mark on the reverse.) Supplied With 110V and 220V Adaptor Several plug types available. The adaptor feeds the applicator and charges the battery. Recharge time: 12 hours Optional Extras Rechargeable Battery Over 1000 metres of labels with one recharge. Up to 400 recharges per battery Battery Charger For two batteries - complete recharge in 2 hours. Works with 110V and 220V Model Length/Stroke (mm) Width (mm) Max. Roll Diameter (mm) LD - 70 Min. 20 15-65 125
	Fixa-Label Applicator No other conventional type label applicators ensure proper and exact labelling like the Fixa Applicator series. Strong, rigid construction with pressed metal dispenser system for high performance Unique edge-sensor adjusts label stroke automatically for less setting up time Speedy, accurate labelling up to 100mm wide Single stroke trigger action Handles most shaped labels No special punch or slits required for feed Min. core size 25mm Model Length/Stroke (mm) Width (mm) Max. Roll Diameter (mm) FIX-30 20 - 60 20 - 30 100 FIX-60 20 - 60 20 - 60 100 FIX-100 20 - 60 55 - 100 100
	Scooter Label Applicator A low cost solution to speedy label application. Simple pull action dispensing system applies all shapes of labels. Easy to set up All plastic construction Label width up to 60mm Any standard core size Model Width (mm) Max. Roll Diameter (mm) SCOOTER 2210 Up to 35 140 SCOOTER 2215 Up to 60 140